Our Industries

Here at HTS Coatings we have worked in everything from aerospace parts to shafts from old industrial air conditioners. With that work has come a lot of knowledge that can be applied to many different situations. Knowing how things work and the issues that they will face is a large part of being able to suggest repairs or new ways of making parts. It helps us guid customers to better solutions and to be able to follow their specifications and even offers way to make their processes better.

General Industrial

industrial plant

General industrial covers a large group of parts we manufacture and repair. This area covers shafts, sleeves, bearing housings and pretty much anything else that can be processed at HTS. Many individuals and shops have brought work to us needing either bearing and seal sections repaired or a full replacement part manufactured. Our machining and grinding capabilities allow us to produce a new part and leave it as is or add wear coatings or welding to make it last longer. These same capabilities can be used to bring old parts back to life. Typically, this new lease on life will allow the parts to last longer than they did in their original configuration.

  • Shafts
  • Pumps
  • Bearing housings
  • Impellers
  • Bronze bearings
  • Babbitt bearings
  • Mis-machined parts
  • Augers
  • Feed screws

Glass

glass manufacturing industry

Glass manufacturing is an extreme process where you are trying to eliminate wear from high temperatures and abrasion from the molten glass. While doing this, you also have to lubricate the glass to allow it to move freely through the process. We offer several coatings that can increase the life of parts such as:

  • Troughs
  • Deflectors
  • Scoops
  • Mold holders
  • Electrodes
  • Transfer plates
  • Orifice rings

 

Mining

mining excavator

Mining is an extremely tough environment for parts. Whether you are dealing with underground mining and the corrosion problems below ground or the wear and tear of above ground mining; we are read to offer ideas to help you improve production and maintenance. Some of the parts we have repaired and/or manufactured include:

  • Hydraulic rods
  • Turbo chargers
  • Suspension components
  • Wear plates
  • Drive components
  • Cylinder liners
  • Pumps

Oil & Gas

Keeping a pipeline, well or refinery producing can be a daunting task. Through the years we have added life to many parts in the process of moving liquids and solids to where they are needed. Often these components are in high wear environments with sand or other abrasives or in severely corrosive environments. Often both wear and corrosion issues are present. There are many coatings and welds that can solve these issues without having to purchase new parts or using exotic metal alloys for new parts. Some of the parts we have found solutions for include:

  • Pumps
  • Rotors
  • Impellers
  • Ball valves
  • Butterfly valves
  • Gate valves
  • Valve bodies
  • Piping
  • Shafting
  • Bearing housings
  • Mud motors
  • Mud pumps
  • Mandrels

Power Generation

power plant

Power generation work, whether in nuclear, coal or wind, requires quick turnaround times and quality work. Much of the work done in this industry is preventing erosion from water on the steam side or high temperature gas resistance. If the system is using corrosive gasses for generating power, there are materials that can prevent corrosion to parts and extending the life of the system. Our solutions also perform well in the harsh environments and high quality standards of the nuclear power sector.

  • Valve stems
  • Blades/Buckets
  • Diaphragms
  • Rotor shafts
  • Spill strips
  • Snout pipes
  • Baffles
  • Motor shafts
  • Pumps
  • Bearings

Print

print industry

The print industry has several unique problems to them. The cleaning agents and inks used can be corrosive to parts on the press and the parts are usually high tolerance. Finding ways to repair these parts can be challenging, but we have dealt with these challenges for many years. We have experience in both web and sheet fed print systems along with ancillary equipment needed.

  • Ceramic ink rolls
  • Grip rolls or draw rollers
  • Anvil rolls
  • Slitter rolls
  • Web printing cylinders
  • Eccentric bearing housings
  • Former boards
  • Roller brackets
  • Spider assemblies

Other? We Can Help!

cnc vertical mill

Even if your industry isn't listed above, it doesn't mean that we can't help you with your project and find a solution. Let us know what you need and we will tell you how we can help.